A. Simoni and G. T. Houlsby, The Direct Shear Strength and Dilatancy of Sand?gravel Mixtures, Geotechnical and Geological Engineering, vol.24, issue.3, pp.523-549, 2006.

R. A. Jewell, Direct shear tests on sand, Géotechnique, vol.39, issue.2, pp.309-322, 1989.

S. Shibuya, T. Mitachi, and S. Tamate, Interpretation of direct shear box testing of sands as quasi-simple shear, Géotechnique, vol.47, issue.4, pp.769-790, 1997.

U. S. Okyay and D. Dias, Use of lime and cement treated soils as pile supported load transfer platform, Engineering Geology, vol.114, issue.1-2, pp.34-44, 2010.

T. Yetimoglu and O. Salbas, A study on shear strength of sands reinforced with randomly distributed discrete fibers, Geotextiles and Geomembranes, vol.21, issue.2, pp.103-110, 2003.

Y. Wasti and Z. B. Ozduzgun, Geomembrane?geotextile interface shear properties as determined by inclined board and direct shear box tests, Geotextiles and Geomembranes, vol.19, issue.1, pp.45-57, 2001.

D. Takano, N. Lenoir, J. Otani, and S. A. Hall, Localised deformation in a wide-grained sand under triaxial compression revealed by X-ray tomography and digital image correlation, Soils and Foundations, vol.55, issue.4, pp.906-915, 2015.

B. Chevalier and J. Otani, Arching Observation in Three-Dimensional Trapdoor Problem with X-Ray CT and Discrete Element Method, Soils and Foundations, vol.51, issue.3, pp.459-469, 2011.
URL : https://hal.archives-ouvertes.fr/hal-02118861

S. Youwai and D. T. Bergado, Strength and deformation characteristics of shredded rubber tire – sand mixtures, Canadian Geotechnical Journal, vol.40, issue.2, pp.254-264, 2003.

H. Hazarika, K. Yasuhara, and M. Hyodo, Sustainable material recycling of scrap tires-few innovative applications in Japan, International Joint Symposium on Geodisaster Prevention and Geoenvironment in Asia, pp.179-184, 2009.

J. Otani, T. Mukunoki, and Y. Obara, Application of X-Ray CT Method for Characterization of Failure in Soils, Soils and Foundations, vol.40, issue.2, pp.111-118, 2000.

S. Taniguchi, J. Otani, and M. Kumagai, A study on characteristics evaluation to control quality of asphalt mixture using X-ray CT, Road Materials and Pavement Design, vol.15, issue.4, pp.892-910, 2014.

J. Otani, T. Mukunoki, and Y. Obara, Characterization of failure in sand under triaxial compression using an industrial X-ray CT scanner, International Journal of Physical Modelling in Geotechnics, vol.2, issue.1, pp.15-22, 2002.

P. A. Cundall and O. D. Strack, A discrete numerical model for granular assemblies, Géotechnique, vol.29, issue.1, pp.47-65, 1979.

S. A. Magnier and F. V. Donze, Discrete Element Project, vol.20, 1997.

R. Katzenbach and A. Schmitt, Micromechanical modeling of granular materials under triaxial and oedometric loading, Numerical Modeling in Micromechanics via Particle Methods - 2004, pp.313-322, 2004.

M. Jiang, Z. Shen, and J. Wang, A novel three-dimensional contact model for granulates incorporating rolling and twisting resistances, Computers and Geotechnics, vol.65, pp.147-163, 2015.

G. Gao and M. A. Meguid, Effect of particle shape on the response of geogrid-reinforced systems: Insights from 3D discrete element analysis, Geotextiles and Geomembranes, vol.46, issue.6, pp.685-698, 2018.

Y. T. Feng, K. Han, and D. R. Owen, Energy-conserving contact interaction models for arbitrarily shaped discrete elements, Computer Methods in Applied Mechanics and Engineering, vol.205-208, pp.169-177, 2012.