B. J. Kemp, A. L. Bateham, and S. J. Mulroy, Effects of reduction in shoulder pain on quality of life and community activities among people living long-term with SCI paraplegia: a randomized control trial, J Spinal Cord Med, vol.34, pp.278-284, 2011.

P. Gorce and N. Louis, Wheelchair propulsion kinematics in beginners and expert users: influence of wheelchair settings, Clin Biomech, vol.27, pp.7-15, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01342184

L. Van-der-woude, A. Bouw, and J. Van-wegen, Seat height: effects on submaximal hand rim wheelchair

J. W. Rankin, A. M. Kwarciak, and W. M. Richter, The influence of wheelchair propulsion technique on upper extremity muscle demand: A simulation study, Clin Biomech, vol.27, pp.879-886, 2012.

M. M. Rodgers, R. E. Keyser, and E. R. Gardner, Influence of trunk flexion on biomechanics of wheelchair propulsion, J Rehabil Res Dev, vol.37, pp.283-295, 2000.

S. De-groot, D. Veeger, and A. P. Hollander, Wheelchair propulsion technique and mechanical efficiency after 3 wk of practice, Med Sci Sports Exerc, vol.34, pp.756-766, 2002.

V. L. Goosey-tolfrey, M. West, and J. P. Lenton, Influence of varied tempo music on wheelchair mechanical efficiency following 3-week practice, Int J Sports Med, vol.32, pp.126-131, 2011.

W. X. Yao, A. Cordova, D. Sola, and W. , The effect of variable practice on wheelchair propulsive efficiency and propulsive timing, Eur J Phys Rehabil Med, vol.48, pp.209-216, 2012.

S. De-groot, M. De-bruin, and S. P. Noomen, Mechanical efficiency and propulsion technique after 7 weeks of lowintensity wheelchair training, Clin Biomech, vol.23, pp.434-441, 2008.

R. Vegter, C. J. Lamoth, and S. De-groot, Inter-individual differences in the initial 80 minutes of motor learning of handrim wheelchair propulsion, PLoS One, vol.9, p.89729, 2014.

R. Vegter, S. De-groot, and C. J. Lamoth, Initial skill acquisition of handrim wheelchair propulsion: a new perspective, IEEE Trans Neural Syst Rehabil Eng, vol.22, pp.104-113, 2014.

F. Ch-enier, A. Champagne, and G. Desroches, Unmatched speed perceptions between overground and treadmill manual wheelchair propulsion in long-term manual wheelchair users, Gait Posture, vol.61, pp.398-402, 2018.

C. Sauret, P. Vaslin, and R. Dumas, Computation of the mechanical power of a manual wheelchair user in actual conditions: preliminary results, Comput Methods Biomech Biomed Eng, vol.15, pp.173-174, 2012.

O. Freixes, . Fern, . Sa, and M. A. Gatti, Wheelchair axle position effect on start-up propulsion performance of persons with tetraplegia, J Rehabil Res Dev, vol.47, pp.661-668, 2010.

M. L. Boninger, M. Baldwin, and R. A. Cooper, Manual wheelchair pushrim biomechanics and axle position, Arch Phys Med Rehabil, vol.81, pp.608-613, 2000.

C. Sauret, P. Vaslin, and F. Lavaste, Effects of user's actions on rolling resistance and wheelchair stability during handrim wheelchair propulsion in the field, Med Eng Phys, vol.35, pp.289-297, 2013.

C. Sauret, P. Vaslin, and J. Bascou, Proposal of an index for evaluating pitch instability during actual locomotion with a manual wheelchair, Comput Methods Biomech Biomed Eng, vol.16, pp.130-131, 2013.

R. Vegter, J. Hartog, and S. De-groot, Early motor learning changes in upper-limb dynamics and shoulder complex loading during handrim wheelchair propulsion, J Neuro Eng Rehabil, vol.12, p.26, 2015.

M. Dabonneville, P. Vaslin, and P. Kauffmann, A self-contained wireless wheelchair ergometer designed for biomechanical measures in real life conditions, Technol Disabil, vol.17, pp.63-76, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00118018

C. Sauret, M. Dabonneville, and Y. Cou-etard, Zeroing of sixcomponent handrim dynamometer for biomechanical studies of manual wheelchair locomotion, Comput Methods Biomech Biomed Eng, vol.17, pp.416-422, 2014.

C. Sauret, Y. Couetard, and P. Vaslin, Dynamic calibration of a wheelchair six-component wheel dynamometer rolling on the floor, Comput Methods Biomech Biomed Eng, vol.14, pp.67-69, 2011.

M. L. Boninger, A. L. Souza, and R. A. Cooper, Propulsion patterns and pushrim biomechanics in manual wheelchair propulsion, Arch Phys Med Rehabil, vol.83, pp.718-723, 2002.

R. A. Cooper, C. P. Digiovine, and M. L. Boninger, Filter frequency selection for manual wheelchair biomechanics, J Rehabil Res Dev, vol.39, pp.323-336, 2002.

G. Legnani, F. Casolo, and P. Righettini, A homogeneous matrix approach to 3D kinematics and dynamics -I. Theory. Mech Mach Theor, vol.31, pp.573-587, 1996.

M. L. Boninger, R. A. Cooper, and M. A. Baldwin, Wheelchair pushrim kinetics: body weight and median nerve function, Arch Phys Med Rehabil, vol.80, pp.910-915, 1999.

A. J. Dallmeijer, L. Van-der-woude, and D. Veeger, Effectiveness of force application in manual wheelchair propulsion in persons with spinal cord injuries, Am J Phys Med Rehabil, vol.77, pp.213-221, 1998.

C. Lin, P. Lin, and F. Su, Biomechanics of wheelchair propulsion, J Mech Med Biol, vol.9, pp.229-242, 2009.

A. M. Kwarciak, S. A. Sisto, and M. Yarossi, Redefining the manual wheelchair stroke cycle: identification and impact of nonpropulsive pushrim contact, Arch Phys Med Rehabil, vol.90, pp.20-26, 2009.

, Paralyzed Veterans of America Consortium for Spinal Cord Medicine. Preservation of upper limb function following spinal cord injury -a clinical practice guideline for healthcare professionals, J Spinal Cord Med, vol.28, pp.434-470, 2005.

J. S. Slowik, P. S. Requejo, and S. J. Mulroy, The influence of wheelchair propulsion hand pattern on upper extremity muscle power and stress, J Biomech, vol.49, pp.1554-1561, 2016.

J. P. Lenton, L. Van-der-woude, and N. E. Fowler, Hand-rim forces and gross mechanical efficiency at various frequencies of wheelchair propulsion, Int J Sports Med, vol.34, pp.158-164, 2013.

M. B. Sabick, K. D. Zhao, and K. N. An, A comparison of methods to compute the point of force application in handrim wheelchair propulsion: a technical note, J Rehabil Res Dev, vol.38, pp.57-68, 2001.

S. De-groot, R. Vegter, and L. Van-der-woude, Effect of wheelchair mass, tire type and tire pressure on physical strain and wheelchair propulsion technique, Med Eng Phys, vol.35, pp.1476-1482, 2013.

B. S. Mason, M. Lemstra, and L. Van-der-woude, Influence of wheel configuration on wheelchair basketball performance: wheel stiffness, tyre type and tyre orientation, Med Eng Phys, vol.37, pp.392-399, 2015.

S. Hybois, A. Siegel, and J. Bascou, Shoulder kinetics during start-up and propulsion with a manual wheelchair within the initial phase of uninstructed training, Disabil Rehabil Assist Technol, vol.19, pp.1-10, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02185659

R. L. Kirby, C. Smith, and R. Seaman, The manual wheelchair wheelie: a review of our current understanding of an important motor skill, Disabil Rehabil Assist Technol, vol.1, pp.119-127, 2006.

, performance during spinal cord injury rehabilitation, J Rehabil Med, vol.41, pp.143-149, 2009.

E. Hong, J. Pearlman, and B. Salatin, Design and development of a lightweight, durable, adjustable composite backrest mounting, Assist Technol, vol.23, pp.24-35, 2011.

S. J. Mulroy, C. J. Newsam, and D. D. Gutierrez, Effect of fore-aft seat position on shoulder demands during wheelchair propulsion: part 1. A kinetic analysis, J Spinal Cord Med, vol.28, pp.214-221, 2005.

B. R. Kotajarvi, M. Sabick, and J. Basford, The effect of wheelchair seat position on peak shoulder joint moments during propulsion up an incline, Arch Phys Med Rehabil, vol.84, p.30, 2003.